quick-z Posted February 25, 2005 Report Posted February 25, 2005 i have a lot of play in my clutch lever when i adjust it on the bars it will stall when put into gear with lever pulled.is this signs of bad cable or bad clutch or both Quote
ledofthezep Posted February 25, 2005 Report Posted February 25, 2005 Sounds like you're probably just out of adjustment...Got a clymers manual? It has step by step instructions on setting up & adjusting your clutch. I swear one of the best investments a banshee owner can make is to get a Clymers Manual. Quote
banshee76179 Posted February 25, 2005 Report Posted February 25, 2005 I swear one of the best investments a banshee owner can make is to get a Clymers Manual. 329739[/snapback] WORD! Quote
scotts96fast Posted February 25, 2005 Report Posted February 25, 2005 I swear one of the best investments a banshee owner can make is to get a Clymers Manual. YEPPERS!!....If you do take your side case off to adjust the cluch do yourself a favor and drill like a two inch hole in the case.next time you have to adjust the clutch u don't have to remove the case.just remove the round cover plate... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.