Jump to content

Recommended Posts

Posted

hey every1 this is my first post and unfortully its about why i cant get my shee started. i bought used mikuni flat body carbs off of soem guy on ebay and i put em on and it fired up fine (this was around october) then it started to act sorta funny, it almost seemed like it had no power, it had power but once i got to 3rd it would just bog. i didnt ride for a couple of months after that, then in decmber i went out to go riden and i couldnt get it started for my life it took like 20 kicks to finelly get it running. now, the only way i can get it started now sence its so cold is to have my buddy tow me and i have to pop start it, and once its warmed up i can kick it over fine. but if i leave it out in the shed one night the next day i cant get it to start if my life depended on it. i dont kno if you guys have any suggestions on what could be wrong with it. (and i dont think its the top end cuz i did a compression test and it has plenty of compression, i ws thinkin it oculd be soemthing wrong with the carbs.)thanks bangheadbanghead

Posted

check the choke jet in the bottom of the left side carbs float bowl. it is located in the bowl where the straight brass tube enters. try blowing through it to check if its plugged. i had this problem and without the choke jet working, its a pain to start. it basically makes your choke useless if its plugged. hope this helps

Posted (edited)
hey every1 this is my first post and unfortully its about why i cant get my shee started.  i bought used mikuni flat body carbs off of soem guy on ebay and i put em on and it fired up fine (this was around october) then it started to act sorta funny, it almost seemed like it had no power, it had power but once i got to 3rd it would just bog.  i didnt ride for a couple of months after that, then in decmber i went out to go riden and i couldnt get it started for my life it took like 20 kicks to finelly get it running.  now, the only way i can get it started now sence its so cold is to have my buddy tow me and i have to pop start it, and once its warmed up i can kick it over fine.  but if i leave it out in the shed one night the next day i cant get it to start if my life depended on it.  i dont kno if you guys have any suggestions on what could be wrong with it.  (and i dont think its the top end cuz i did a compression test and it has plenty of compression, i ws thinkin it oculd be soemthing wrong with the carbs.)thanks banghead  banghead

310078[/snapback]

I wolud get new plugs, clean the carbs, check your jetting. If you had power in to third and then it layed down it might be lean. If it started when it was warmer but not now your pilot or air screw might be off. what was the jetting in your old carbs compared to the new ones.

 

Welcome

Edited by FIRST BANSHEE

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...