hotrodbanshee Posted January 17, 2005 Report Posted January 17, 2005 (edited) I had a rattling noise in the clutch area so I replaced the basket since there was slack on the starter gear. Installed a new hinson basket and spacer on the main shaft. Put it back together and still has a rattling noise in the clutch area. The rattling goes away when the clutch lever is pulled in. What would be causeing this noise? Should i worry? Edited January 17, 2005 by hotrodbanshee Quote
RNBRAD Posted January 17, 2005 Report Posted January 17, 2005 I've had that noise for 6 yrs. Still there after basket and new plates. Yes goes away when clutch is pulled in. Never a problem though. Quote
Leadfoot350 Posted January 17, 2005 Report Posted January 17, 2005 Is your kick stater making the noise? Quote
hotrodbanshee Posted January 17, 2005 Author Report Posted January 17, 2005 No it's not the kick starter. It's inside the clutch cover Quote
wesw Posted January 18, 2005 Report Posted January 18, 2005 i see where you only put the basket it. i put the whole system in. the basket, hub, pressure plate. for some reason the plate hits and rubbs the clutch case. have you checked your oil. mine had metal shaving in it. from rubbing on the case. to solve i took a air disc sander sanded on the case where the clutch cover bolts are thru the case about 1/8 if that gotta watch out and not remove too much stopped it. no noise now probably not a problem for what you got \ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.