jetting help plz?

[liquedfire]

my motor is .80 over and i got dg front pipes what jetting should i run??

 

i also have a k@n air filter wit a boost bottel

i have stock jetting now (200 is stock right??)

 

thanks

[liquedfire]

oh ya i have major port and polishing done also

[DIRTBIKEZ]

Honestly, is this a joke?

[Ultimateduner]

Through my experiences I would say 300?? 310?? ALso change the pipes, dg's aren't the best for porting.

[liquedfire]

no its not a joke id rather be safe then sorry

 

thanks for the info ill try it im new 2 jetting stuff i always ran stock parts and what pipes do u think i should use for porting ?? fmf or t5 thos are my only other options thanks

[banshee76179]

fmf fatties is good pipe, and UD had it right I would start around the 310 or 320 and work my way down...

[Banchetta]

I'd start w/ a 300, I'd guess it'll be too rich and you'll most likely end up w/ a 280-290, but better to start rich and work down. You might also want to try raising the needles. It might help your low end and throttle response. The DG exhaust is probably one of the only exhaust I've never ran besides the 2 into 1, so I can only give you a baseline.