Duninshee Posted December 1, 2004 Report Posted December 1, 2004 I am going to pull the crank to have it trued and welded. Is there any type of instruction manual to do it or am I just going to have to pull it apart by feal. I would just let the shop do it but $310 doesn't quite sound like a bargan. Can anyone give me some advise as what to do and what not to do. Thanks Quote
frocashmoney24 Posted December 1, 2004 Report Posted December 1, 2004 clymers manual, they sell em on ebay, and in book stores, there like 25 bucks and everybody that owns a banshee should own one Quote
BenBB Posted December 1, 2004 Report Posted December 1, 2004 clymers manual, they sell em on ebay, and in book stores, there like 25 bucks and everybody that owns a banshee should own one 287316[/snapback] True that. Take your time and keep everything clean. An impact will help alot with the flywheel & clutch nut. And if you run into any snags along the way there's always someone here to help out, good luck. Quote
00BANSHEE Posted December 1, 2004 Report Posted December 1, 2004 (edited) Here is a banshee manual you can download for free. Hope it helps you out. Nothing beats a clymer's though. In fact, I have one I'll sell you for $20 shipped to the lower 48. Let me know. Yamaha Manuals Edited December 1, 2004 by 00BANSHEE Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.