sheeintoxicated Posted November 16, 2004 Report Posted November 16, 2004 I have 03 banshee now on the front brake lever their is one hose for the master cycl,what is the other wire for can somebody tell me and can i get rid of it Thanks maria Quote
BenBB Posted November 16, 2004 Report Posted November 16, 2004 Brake light switch probably, my '96 doesn't have one so not sure how it works exactly (don't know if all the fluid will pour it if you remove it heh)...but then the brake light wouldn't light up when you hit the fronts... Quote
sheeintoxicated Posted November 16, 2004 Author Report Posted November 16, 2004 its just two wires .it might be for the brake light like you said witch i remove the rear brake already so maybe i can remove the two wires than Thanks maria Quote
ranshee Posted November 17, 2004 Report Posted November 17, 2004 One should be your brake line, the other is a throttle and another is for the tors crap. If I am corect there should be three wires there when brand new. If your talking about the tors wire, go ahead and remove it if you have unpluged your tors Quote
sheeintoxicated Posted November 17, 2004 Author Report Posted November 17, 2004 No its on the brake lever its two wires.i no the cable you are talking about for the tors its on the thumb for the throttle. its on the lever it self. Quote
sheeintoxicated Posted November 17, 2004 Author Report Posted November 17, 2004 Ok i found out what it is call.Front stop switch assy.I guess that to light the rear brake light.anybody have any input thanks maria Quote
ranshee Posted November 17, 2004 Report Posted November 17, 2004 Well its just a wire for the brake light, you should be able to get rid of it. Is it pluged in or is it hard wired to the perch. I have an 04 and mine does not have this extra wire. My tail light comes on when I hit the back brake. ???I think??? Quote
Meat Posted November 17, 2004 Report Posted November 17, 2004 Yea they're for the brake light. No doubt. keep em plugged in if you wanna use the brake light. Quote
BenBB Posted November 17, 2004 Report Posted November 17, 2004 Ok scoped out the online microfiche, hard to tell but it looks like that switch works off the lever and not hydraulic pressure, so you should be able to just remove it. If there's any doubt about losing brake fluid, back it out slowly and see if any brake fluid comes out (I don't think it will). BTW welcome to the HQ. Now post some pics of you and your Banshee! Hehe j/k Quote
sheeintoxicated Posted November 18, 2004 Author Report Posted November 18, 2004 thanks for your help guyz it was for the rear brake light.I removed it ...... Quote
sredish Posted November 18, 2004 Report Posted November 18, 2004 Those wires ARE the brake light and they can be removed with no probs. Just put a little pin in the slot on top and pull it out. Quote
cb67rs1 Posted November 18, 2004 Report Posted November 18, 2004 damn why did you pull it of? bulding a drag bike? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.