lineybiker_11 Posted November 1, 2004 Report Posted November 1, 2004 On my shee i have some mild engine work but stock pipes. on the low end it will load up and be boggy if you let it idle for to long but when i lean it out with the air screws it has no low end torque it barly will lift the tire what do i do? Quote
lineybiker_11 Posted November 1, 2004 Author Report Posted November 1, 2004 oh ya when its boggy i can touch the bumper to the ground in first gear Quote
Schizo Posted November 1, 2004 Report Posted November 1, 2004 On my shee i have some mild engine work but stock pipes. Mildly ported with stock pipes??? Kinda defeats the purpose......porting is to allow better air flow and the stock pipes restrict air flow. Get some pipes and you'll have a totally new machine. Quote
Bansheerider29x Posted November 3, 2004 Report Posted November 3, 2004 check your spark plugs after a few hours put on spark plugs they end up starting to foul. it could be the plugs also becuase with slighty fouled plugs you will have no low end power and some upper end power Quote
banshee76179 Posted November 3, 2004 Report Posted November 3, 2004 On my shee i have some mild engine work but stock pipes. Mildly ported with stock pipes??? Kinda defeats the purpose......porting is to allow better air flow and the stock pipes restrict air flow. Get some pipes and you'll have a totally new machine. kind of what I was thinking.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.