slowpokebanshee Posted October 19, 2004 Report Posted October 19, 2004 I recently acquired some T-5s but when I tried to bolt them up, I noticed the Silencers, have a small mounting hole, and the mounting hole near the grab bar, is large, leading me to believe that there is some sort of "hanger" required? the pipes I got used so ,I need to purchase whatever is required to mount these up properly. thank you Quote
98bonerSTOCKshee Posted October 19, 2004 Report Posted October 19, 2004 I recently acquired some T-5s but when I tried to bolt them up, I noticed the Silencers, have a small mounting hole, and the mounting hole near the grab bar, is large, leading me to believe that there is some sort of "hanger" required? the pipes I got used so ,I need to purchase whatever is required to mount these up properly. thank you mine used all stock mounts.... Quote
racer Posted October 19, 2004 Report Posted October 19, 2004 yeah, they use a small hanger (like the one used in the front) to mount the silencers. Quote
jaysea1 Posted October 19, 2004 Report Posted October 19, 2004 You can buy those from Toomey for about $25 or $30, they're aluminum hangers. Quote
2stroker Posted October 19, 2004 Report Posted October 19, 2004 If you're a cheap bastard like me, you can make your own hangers. I made some out of 16ga. aluminum. I cut two 1"x2" pieces, rounded the corners, and drilled the holes for the bolts. Works like a charm. Quote
98bonerSTOCKshee Posted October 21, 2004 Report Posted October 21, 2004 (edited) yeah, they use a small hanger (like the one used in the front) to mount the silencers. yeah that's right. I remember mine came with the tabs, and bolted where the old hangers were... Toomey.com Edited October 21, 2004 by 98bonerSTOCKshee Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.