tacoking Posted September 23, 2004 Report Share Posted September 23, 2004 I just installed a proflow kit on my bike and have removed the lid. The only other mods I have are a cool head with 21cc domes. I am riding at about sea level to maybe 500' max elevation change with 70-80degree weather. I was running fmfs jetting 30pilot 260main needle in 3rd pos, with the lid on, snorkle removed and a uni filter and the bike ran perfect. I adjusted the jetting to a 290main and went riding at Pismo. The bike ran like crap. It had no low end power and would only get on the pipe on flat terrain where i could keep the my speed up. If I tried going slow at all up any sort of hill it would either cut out or creep up it at a crawl. I am pretty sure it's way to rich and have ordered 280 mains and will probably move the needle down a couple notches. Does that sound about right? Any info is appreciated. Quote Link to comment Share on other sites More sharing options...
Banchetta Posted September 25, 2004 Report Share Posted September 25, 2004 Is Pismo at a higher elevation? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.