tacoking Posted September 23, 2004 Report Posted September 23, 2004 I just installed a proflow kit on my bike and have removed the lid. The only other mods I have are a cool head with 21cc domes. I am riding at about sea level to maybe 500' max elevation change with 70-80degree weather. I was running fmfs jetting 30pilot 260main needle in 3rd pos, with the lid on, snorkle removed and a uni filter and the bike ran perfect. I adjusted the jetting to a 290main and went riding at Pismo. The bike ran like crap. It had no low end power and would only get on the pipe on flat terrain where i could keep the my speed up. If I tried going slow at all up any sort of hill it would either cut out or creep up it at a crawl. I am pretty sure it's way to rich and have ordered 280 mains and will probably move the needle down a couple notches. Does that sound about right? Any info is appreciated. Quote
Banchetta Posted September 25, 2004 Report Posted September 25, 2004 Is Pismo at a higher elevation? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.