value of a banshee

[maynard22]

I found a 2000 Banshee for 3200 that is all stock, has never been wrecked and runs good, is 3200 a good price?

 

I got the wrong info on the bike, it has been jetted and piped, so now what do you all think of the 3200 price? I am in Tulsa Oklahoma.

Edited August 17, 2004 by maynard22

[Westro]

I have a 98 with lots of aftermarket equipment for 3100. You should be able to get a slightly modded shee for less. You lose big bucks on your aftermarket parts, the same parts that you will start to buy with a stock one.

 

my 2 cents.

-Marc

[.]

Where you located?

 

I'd say you could find a good used one with a bunch of stuff done to it for that price.

[tithead]

i got my 98 shee 2 years ago. i got it with some aftermarket parts - exhausts, tyres with rims, bars, nerfs, swinger, a arms, shocks and axle for

[NYUK]

i buy them left and right, loaded, for 1,500 to 2,000, up to like 02 models. shop around.you can get a newer worked one for that, try e bay, look nearest to you.

Edited August 16, 2004 by NYUK

[nickxc]

I bought my 01 with alba flame graphics, umi bars, nacs clamp, sst's, v force reeds, armadillo bumper and a twist throttle for $3450.00 off ebay, I had to drive 3.5 hours to get it but it was mint with prolly less than 10 hours. stock tires with 90% tread, the paint on the engine case next to the kicker ( the spot that wears off almost as you drive it off the lot.) wasn't even started to wear off, everything was super tight... Id shop around a little bit...

[NugShee]

Id say that the shape it is in matters more then the price of the shee. You may find a cheap one but have to put 2K into it to perform the way you like. I bought mine for $3900 and just dropped another $1600 into it to make her sweet. I could have probably got a nwer shee in better shape for less money if I had waited. Good Luck, Mike

[Ducman]

It reeeeeealy depends on where you live. In CA that would be an very good price other places that would be a fair price.