Looking into Banshee parts..

[harley_sr]

Whats the deal with Noss Heads? Are they any good? What would be the best head for the money. I really dont want to spend over $250

 

Also Carbs? I was looking into PCW or PWC some thing like that 28mm or 30mm? They are a complete kit with throttle cable, jets, and vent tubes..

 

That will get me started..

 

I got a banshee now, and the motor is stock other than a T-5 pipe set.. It does need a head, the one on it has some pitting on the left side..

 

Also is a Noss Head worth $185 New?

[locogato11283]

yes, definetely go with a noss head. pm "dlnoss" here and he can get you set up. i dont personally have one of his heads becasue mine came with a different kind, but if i were to buy one it would be a noss head. and if you want really good customer service, i have never heard or seen any complaints about dlnoss. as for carbs, if you are basically runnin a stock engine, stock carbs are fine. i think it has been posted before that the stock carbs actually outflow a stock engine. so with your mods id say its prolly runnin pretty good. if you do decide to go bigger, i wouldnt go much more than 28mm.

[harley_sr]

Well I got a Noss Head off ebay like 15mins ago. He had it listed as a over stock item, and got it for $185. Is that a good deal?

 

As for Carbs, I found the kit listed above for $185 also. But where would I get new intake boots? I would need them for the 28mm carbs right?

[zilladude]

28mm carbs will fit in the stock intake & airbox boots.

[frocashmoney24]

you have the head, now you need domes, ask dlnoss for size domes you should be runnin for your setup, he'll help you out, great guy to work with!

[harley_sr]

He said that i would prob. need 21cc for my set up. I have a quick question about jetting?

 

With my set up, T-5's, V-Force2 reeds, Noss Head, 21cc Domes, Boost Bottle, 28mm carbs, what kinda jetting am I looking at? What would be a good point to start at?