coolhead03 Posted July 13, 2004 Report Posted July 13, 2004 im running a 360 main now at 50:1 what should i expect if anything If i switch to 80:1 Quote
broke Posted July 13, 2004 Report Posted July 13, 2004 More fuel, less oil. Will probably run a little rich. Try a plug chop to be sure, but if anything you may be looking at about 1 size down on the mains. broke Quote
sredish Posted July 15, 2004 Report Posted July 15, 2004 It will richen up some, but probably not near enough to really tell. The amount of fuel/oil change is very insignificant in regards to the air/fuel ratio. If your good at 50:1, then you should be fine at 80:1. If there is a problem, it should begin to sputter or something indicating a rich condition, and this really won't hurt anything, so I'd just switch the ratio like you want to do and then go out and run it. If it's too rich, then you'll know and you can rejet accordingly, if it runs fine, then go out and have fun. Later. Quote
ngelati Posted July 16, 2004 Report Posted July 16, 2004 coolhead03, What oil will you use to run al 80:1 ratio? Quote
sredish Posted July 16, 2004 Report Posted July 16, 2004 coolhead03, What oil will you use to run al 80:1 ratio? you can run amsoil at that ratio. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.