00BlueShee Posted June 27, 2004 Report Posted June 27, 2004 When I start my banshee, the left side of the engine ( where the carb has the choke valve) is spiting out white smoke and alot of unburned gas, the right side of the engine seems to be doing good. I have pro circuit pipes, k and n clamp on air filters,v-force reeds,milled head .35 over, mild port n polish. Im at sea level, and the average temperture right now is about 80 degree's F. Im using 340 main jets with 30 pilot jets. What should I do to get my engine running right? I think it might be an electrical problem,but im not sure. Should I drop the pilot jets back down to 25? Quote
PlaynSand Posted June 27, 2004 Report Posted June 27, 2004 You might check and make sure the carbs are in sync , one of the slides may be opening more . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.