SiCkBaNsHeE_990 Posted May 19, 2004 Report Posted May 19, 2004 I just my dynoport 2 into 1 pipe in from someone that i bought it from. Anyways i got it on and its leaks. I got the o-ring on there and there is still space and i cant push it up on the port anymore. Anyone had this problem and got any suggestions? Quote
FadedDreams Posted May 19, 2004 Report Posted May 19, 2004 I might be wrong,but i think with those pipes they need some type of high temp silicone applied to be leakproof.Maybe someone else can give you a better idea on that. Quote
SiCkBaNsHeE_990 Posted May 19, 2004 Author Report Posted May 19, 2004 ya i was thinking about that also. anyone else got any suggestions Quote
Holyman Posted May 19, 2004 Report Posted May 19, 2004 A good thick shmear of silicone on the spigots before you put on the pipe and let it cure before you run it. should work just fine. Quote
RIDEKY Posted May 19, 2004 Report Posted May 19, 2004 GO TO AUTO ZONE AND GO IN THE BACK WERE ALLTHE MUFFLER STUFF IS AND YOU SHOULD BE ABLE TO FIND THESE BIG THICK RUBBER EXHAUST GASKETS. THEY MIGHT BE RUBBER HANGERS BUT WORKED GREAT FOR ME. BE SURE TO MEASURE YOUR EXHASUT PORT. Quote
dalegoldston Posted May 19, 2004 Report Posted May 19, 2004 I use teflon pipe tape. Just wrap it around the ports and but up to it, works well for me and is high temp. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.