Air Filter

[yan]

i know i have to clean the air filter alot but i am running a pro design pro flow air

 

filter and the outer red fiter i some what pretty dirty so i guess that the yellow

 

filter that is under the red one would be dirty

 

so my question is that would it take alot of sh*t to make it through the both air

 

filters and get in side the motor so would i have to clean the air filter alot (within reason)

 

i have tr6 pipes and the pipe set comes with these little 1" air hole thing to put into the air box for more air intake and there is 12 of them so i put tape

 

over the holes and it stop some air intake and it realy made a differance it got slower i know that it is normal but do i have to re jette or what

 

my banshee semed to get hotter than usual is that bad that i cover the air holes like that

Edited May 15, 2004 by yan

[MILO]

clean both of the filters frequently, especially after a day of really dusty or muddy/wet riding. any change to air flow will require rejetting. unless you get into water over the airbox, ditch the lid all together and rejet accordingly. the pro flow should work great, but you WILL have to clean the filters more frequently, but it's well worth it.

Edited May 14, 2004 by MILO

[frocashmoney24]

yea i know alot of people who clean n oil theres after eveyr ride, i do it after every 2or 3, but gotta keep it clean to keep the shee runnin good

[Rescuejeff]

I have the same Pro Design adpator, I clean and reoil the K&N after every weekend, even with a Outwear. I do sand only which is worse than dust, so do what you please, but if it was me, I would be doing the wash after every trip!!!

[U8RSAND-Az]

There's no substitute for a clean filter. When I go camping for 3-5 days I take a couple of cleaned and oiled filters put them in separate Ziploc bags and change the filter in the mornings. Just let go of some of that cash and live the good life!

[nickxc]

Just let go of some of that  cash and live the good life!

 

agreed!!

 

take that lid off if you don't drown it in water frequently and rejet accordingly. read your plugs and you'll gain lots of hp's without that lid and proper jetting.