quadlt500 Posted May 12, 2004 Report Posted May 12, 2004 i have a 97 banshee i just bought. i had it bored. it wont start. if u pull start it it will start but wont rev up when u shut it off it it will fire once and that is it it wont fire again any ideas. i tried another coil and it wouldnt fire either any help would be appreciated Quote
bansheewizard Posted May 12, 2004 Report Posted May 12, 2004 will it say started up when you pull it off or will it just go dead and are you sayin it wont rev but still go a lil Quote
quadlt500 Posted May 12, 2004 Author Report Posted May 12, 2004 (edited) it will start up and idle but will not pull itself u have to hold the throtttle in some to keep it running and if u open it up all the way it wont rev anymore its revs to a high idle thats it Edited May 12, 2004 by quadlt500 Quote
bansheewizard Posted May 12, 2004 Report Posted May 12, 2004 im not sure but i know when mine needed a rebuild mine did the same thing i would not start unless i pushed or pulled it off and it would hardly pull my weight if you have a compression checker check it or go the the stealer ship it will be like 10$ to get the to check it im pretty sure if it lower then about 110or 100 its gonna need a rebuild Quote
quadlt500 Posted May 12, 2004 Author Report Posted May 12, 2004 (edited) it just got bored yesterday. it had 50 psi before that Edited May 12, 2004 by quadlt500 Quote
dogboystoy Posted May 12, 2004 Report Posted May 12, 2004 Well, If you have good compression, then maybe you carbs are off?, are the sliders in the correct carb? (there is a left and right) and that will make all the difference in the world, and since you may have taken that apart for your rebuild the it is possible you switched them. Also if that isnt it, then maybe your CDI is bad, but I bet the problem lies in your carbs. Check your carb boots, and all seals. Quote
Im-Loving-It 69 Posted May 12, 2004 Report Posted May 12, 2004 Is the Balance tube between the carburetors? If that ant there it will start very hard and than if you do get it running it will run like shit. Just my thoughts Quote
quadlt500 Posted May 12, 2004 Author Report Posted May 12, 2004 the carbs are right i marked them when i took them off. the not reving isnt whats bothering me its the no spark problem. the tube is in there Quote
bansheewizard Posted May 12, 2004 Report Posted May 12, 2004 i d k man mine did this 2 days after i got mine rebuilt and the prob was the ring broke so i had to get it rebuilt just go pay 10 and check the compression Quote
superchicken Posted May 13, 2004 Report Posted May 13, 2004 it sounds like a parking brake switch,not sure if a 97 has it or not.that switch wont let the rpms go past much more than idle.unplug the tors box under the left side of the gas tank and see if she wile fire up Quote
quadlt500 Posted May 13, 2004 Author Report Posted May 13, 2004 i unhooked the tors. the black box the wires on the carbs and the parking brake wire is that all i have to unhook. do i have to hook any wires together. i tried testing my stator. i got juice thru one wire it was the yellow wire and thats it. is that the only one that is suppose to have fire?its a 97 banshee Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.