Pipe Hangers & Clamps

[KRMit]

Is there anywhere I can find some hangers for less than $40? Those things are bringing a pretty penny online. I need some good clamps too, but they're not quite as high of a priority. Thanks!

[bansheeboy2004]

what do you need the hangers for (banshee pipes???) let me know that and for the clamps fow big of pipe do they need to fit (like 1" to 1-1/8" or bigger) let me know

[KRMit]

what do you need the hangers for (banshee pipes???) let me know that and for the clamps fow big of pipe do they need to fit (like 1" to 1-1/8" or bigger) let me know

Yeah, they're for Banshee pipes. I have FMF Gold Series pipes. I think they're the same for CPI, Toomey and FMF but I could be wrong.

[00BANSHEE]

I have the stock pipe hangers off my 2000. Still look new. You can have them for $30 shipped. I also have the cascade billet clamps (needs rubber replaced) for the FMF pipes. $35 shipped. or all of it for $60 shipped. Let me know.

[bigboybanshee]

If your just looking for stock replacement on the pipe hangers (not the pipe clamp) if I can find my old ones I'll let you have them...they're just collecting dust somewhere in my garage Let me see if I can find em just in case

[KRMit]

I have the stock pipe hangers off my 2000. Still look new. You can have them for $30 shipped. I also have the cascade billet clamps (needs rubber replaced) for the FMF pipes. $35 shipped. or all of it for $60 shipped. Let me know.

Isn't that a bit steap if they need the rubber replaced? Where can you get that stuff from anyway? I've tried using rubber hose and it'll melt.

[00BANSHEE]

They just sold

[KRMit]

If your just looking for stock replacement on the pipe hangers (not the pipe clamp) if I can find my old ones I'll let you have them...they're just collecting dust somewhere in my garage Let me see if I can find em just in case

You'd be my savior!!

 

Whoever had my Shee before me used some retarded looking makeshift brackets that I hate.

[bigboybanshee]

Where can you get that stuff from anyway?

Try this link Rubber replacement

[KRMit]

$44??

 

Wow. I better keep my eyes open on Ebay.

[frocashmoney24]

try www.jlatvproducts.com they have a set of both clamps for like 50, i have stock hangers you can have to if bansheeboy dont find his

[Wallrat]

I bought some RIS billet ones from alba for $44.

[KRMit]

try www.jlatvproducts.com they have a set of both clamps for like 50, i have stock hangers you can have to if bansheeboy dont find his

Thanks a lot for the offer! BigBansheeBoy found his and is sending them to me though. It's nice being a member of a community that helps each other out so generously.

[KRMit]

I received the hangers from BigBoyBanshee today. Whoa! He sanded and repainted them. They look brand new. Thanks man!

 

Now which way do the stock hangers go on? One tab is straight while the other has a bend in it. Which side mounts to the frame, or does it matter?

[bigboybanshee]

Glad you like them!! I honestly don't think it's gonna matter which way you install them..I'd just see which way would fit best with your pipes. There's not an incredible amount of pressure on them. You will need a spacer and slightly longer bolt to mount the part that goes onto the frame. I wish I could have sent em to you but I had to use em on mine. If you need a pic of the kind of bolt/spacer you need, I'll gladly take one and post it here. Let me know!