BansheeBrian Posted March 31, 2004 Report Posted March 31, 2004 I noticed some wicked casting flaws on my intake and exhaust walls.Would it be wise to grind them out or leave them be? It looks pretty rough in there! Quote
350duner Posted March 31, 2004 Report Posted March 31, 2004 As long as you don't change the size or shape of the ports you don't have anything to worry about. Go for it. Just don't polish the intake. Also a small gain can be had by knife edging the intake bridge and any other "brick walls" the intake faces. That's considered a mild port. Quote
Aussie Quad Racer Posted April 1, 2004 Report Posted April 1, 2004 Take note. Every bit that you grind or mod changes the way the air flows in that area. Quote
BdBanshee Posted April 2, 2004 Report Posted April 2, 2004 Be careful and take it slow. Also, make sure you don't grind any of the sleeve away or it will have to be re-chamfered. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.