Mr.Giggles Posted March 30, 2004 Report Posted March 30, 2004 I'm installing a casesaver and was thinking if I take the 3 screws out of that white dewhickey is there going to be anything fall out inside the case. And I assume I will have to drain the oil,correct.??? Thanx Quote
BenBB Posted March 30, 2004 Report Posted March 30, 2004 You don't hafta drain the oil, just flip the quad up on the right side. Even if you don't flip it up, you won't lose hardly any oil when you pull that plastic peice. It just covers the end of the shift drum (only used as a neutral indicator on RZ's), the white plastic part has an o-ring seal on it... BTW on my case saver, the plastic type, you don't even need to pull the white plastic thing off, just remove the bolts, set the case saver in place OVER the white thing, and use the longer bolts. I also had to shave the stator cover slightly at the top rear to clear the case saver. Good luck. Quote
Mr.Giggles Posted March 30, 2004 Author Report Posted March 30, 2004 Thanks Ben,just what I needed to know Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.