hill climb Posted March 16, 2004 Report Posted March 16, 2004 I am happy to say that my jugs are being shipped to passion racing for port work, but I can't get the studs out of the engine. Any tips or ideas on how to remove them. the last thing I want to do is break them off. Thanks for any help offered. Quote
909 Posted March 16, 2004 Report Posted March 16, 2004 Take 2 of the nuts from the cylinder bases, put 1 on upside down so the washer is facing away from the case, put the other opposite so the 2 flat flanged sides of the nuts are touching. Put a wrench on both and tighten them together. Put a wrench on the bottom nut and turn lefty loosey. Spray a bit of liquid wrench on the base of the stud first to loosen up any crud in there. when you're done, clean the crap off the threads and put 'em back in but righty tightie! Quote
hill climb Posted March 16, 2004 Author Report Posted March 16, 2004 worked great. thanks for the help. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.