hill climb Posted March 16, 2004 Report Share Posted March 16, 2004 I am happy to say that my jugs are being shipped to passion racing for port work, but I can't get the studs out of the engine. Any tips or ideas on how to remove them. the last thing I want to do is break them off. Thanks for any help offered. Quote Link to comment Share on other sites More sharing options...
909 Posted March 16, 2004 Report Share Posted March 16, 2004 Take 2 of the nuts from the cylinder bases, put 1 on upside down so the washer is facing away from the case, put the other opposite so the 2 flat flanged sides of the nuts are touching. Put a wrench on both and tighten them together. Put a wrench on the bottom nut and turn lefty loosey. Spray a bit of liquid wrench on the base of the stud first to loosen up any crud in there. when you're done, clean the crap off the threads and put 'em back in but righty tightie! Quote Link to comment Share on other sites More sharing options...
hill climb Posted March 16, 2004 Author Report Share Posted March 16, 2004 worked great. thanks for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.