shortbus Posted March 16, 2004 Report Posted March 16, 2004 My crank is toast so I need a new one. Looking to get one with good bearings and rods. Need it SOON. E-mail [email protected] Quote
FULL_METAL_JACKT Posted March 16, 2004 Report Posted March 16, 2004 I got stock crank trued and welded just sittin in my garage bearings are still ok. Quote
shortbus Posted March 16, 2004 Author Report Posted March 16, 2004 How much? Bearings must be in good shape rods also. What year did it come out of? Quote
brock_fuzzy_69 Posted March 16, 2004 Report Posted March 16, 2004 i have a stock crank from a 97 that is still good as far as i know the bearings spin freely i hadnt checked the rod side clearance yet though ???? but i fu want i can do that or i could send it your way to be inspected and see what u think of it??? otherwise i will ebay it here in a few weeks when i get around to it Quote
NYUK Posted March 16, 2004 Report Posted March 16, 2004 i got a tight 99 on e bay right now. check my link in the online auction watch.complete motor . Quote
brock_fuzzy_69 Posted March 17, 2004 Report Posted March 17, 2004 my rod clearnace was about 20 thou on each rod i didnt look up the book spec to know if thats where its supposed to be at or not but the wiseco crank i had was about the same the bearigns felt alright as well i compared them to the wiseco crank thats i have and they were about the same in side play Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.