tbd Posted February 12, 2004 Report Posted February 12, 2004 i'm going to rebuild the motor and i wanna do it, i just want to know how involved it is do i have to remove it? if so how hard is it? TIA Quote
SDD Posted February 13, 2004 Report Posted February 13, 2004 Banshee's are the easiest motors to work on in my opinion... well besides an air cooled single. What do you want to do to it? Doing a topend is pretty simple... just take your time and make sure you put all bolts and nuts into labeled ziplock bags. Get a manual to help guide your way.... pretty simple if you have the right tools for the job. Quote
tbd Posted February 14, 2004 Author Report Posted February 14, 2004 top end i know , but i wanna about the crank welding Quote
Lepew Posted February 14, 2004 Report Posted February 14, 2004 You will need to pull it and take it to a good machine shop. They make sure the journals are true within thousandths of a inch then tack it together so it won't turn with a tig welder. It is suggested if you have it out or you build your motor over 45HP. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.