jadaven Posted February 4, 2004 Report Posted February 4, 2004 just installed my trinity 2-1 carb system. How do you set the idle on the keihin 35mm. I think it is the black screw/ knob if it is which way do i turn it to increase the idle. thanks Quote
sredish Posted February 4, 2004 Report Posted February 4, 2004 How do you set the idle on the keihin 35mm. I think it is the black screw/ knob if it is which way do i turn it to increasethe idle. Yes, it is the black screw knob, and if I remember correctly (its been so long), clockwise for increased rpm. Good purchase, you'll be happy when you get it all setup. Quote
dirtbike killer Posted February 4, 2004 Report Posted February 4, 2004 If that doesn't work, adjust it with your cable. Make sure you leave the black screw, at less one full turn out. If you dont, you will have a bad off idle bog. Quote
sredish Posted February 4, 2004 Report Posted February 4, 2004 If that doesn't work, adjust it with your cable. Make sure you leave the black screw, at less one full turn out. If you dont, you will have a bad off idle bog. I'd sure like to have your lt250r. I sure miss mine. Quote
jadaven Posted February 8, 2004 Author Report Posted February 8, 2004 thanks guys got it working fine. Black knob and some cable adjustment and its runnin great!!!! thanks alot Quote
dirtbike killer Posted February 9, 2004 Report Posted February 9, 2004 Yeh, I love that little lt250. Jadaven I'm glad to here it runs fine now. Quote
Blue Duece Posted February 9, 2004 Report Posted February 9, 2004 dont some carbs the choke pull turns counter clockwise to raise the idle?....... Quote
00BANSHEE Posted February 9, 2004 Report Posted February 9, 2004 dont some carbs the choke pull turns counter clockwise to raise the idle?....... The Keihin PJ series Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.