Jump to content

Recommended Posts

Posted

Hello everyone,

I have another problem again. Last week the Banshee would not start. I tried many times but could not get it to run. This weekend i finally checked for spark and found I had none. I bought new plugs and checked again and still had none. So I decided to unplug the TORS box and then I found that I again had spark. But now I still cant get it started. I really never messed with anything, and i did cut any wires, just unplugged the TORS box. I don't know if it is really flooded bad or what. Any help would be appreciated.

Thanks

Posted

Just an update, I just went outside to look at the banshee and I left the fuel cock on. Just from sitting overnite, there is a huge puddle of fuel underneath and it looks like it came out of the carb drain tubes.

Posted

OK, here is another update. I left the fuel cock off, choke open, and i held the throttle wide open to try to empty the carbs and it fired up. I let off the throttle, it stayed wide open, then died. Now it wont start again.

Posted

SOunds as though you may have an air leak. Or, the crankcase filled up with fuel. Or, the pilots are clogged. I suggest puling the carbs to clean them out. Either way, the float valve(s) are not doing their job. They are not stopping the flow of fuel into the float bowl. SO, something must be done. Start there.

Posted

You are all awsome!

 

I pulled the air cleaner off today and the right slide was stuck wide open. I figured that is why the throttle override wasnt giving spark either. But anyway, I pulled the carb apart, fixed the slide and plugged TORS back in and I finally got it started again. I would like to thank everyone for the help, THANKS :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...