Yamaha350T Posted January 10, 2004 Report Posted January 10, 2004 I just got a Tusk tether kill switch. I hooked the positive wire to the positive side of the coil, and put the ground to the frame. The problem is that it runs with the switch out and dies when I put it on. Its backwards. How do any of you hook one up. Like where do you ground it and where do you put the positive wire. I dont have enough wire from the key that used to be on it, so I'm trying to do it without the key wires. PLEASE HELP Quote
superchicken Posted January 10, 2004 Report Posted January 10, 2004 i hooked mine inline with the handlebar kill switch.thats the one with the open circut.the key switch is closed to run .thats why its working backwards Quote
spoin39 Posted January 12, 2004 Report Posted January 12, 2004 If I remember right it is the black w/white stripe wire, but it has been awhile. Quote
SICK BOY Posted January 12, 2004 Report Posted January 12, 2004 Go to bluetrax.com they have good directions for this. Quote
Klotz Posted January 12, 2004 Report Posted January 12, 2004 do what wallrat said or wire it into the kill switch and the best part is after you do that then the red on off button doesnt work,,,,,i hates that thing Quote
Yamaha350T Posted January 13, 2004 Author Report Posted January 13, 2004 Thanks everybody, but i ended up just stripping some tape off my wires and finding the key switches two wires. It works mint now. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.