FoxBansheeRacing Posted January 7, 2004 Report Posted January 7, 2004 I'm taking my head and cylinders off soon and was wondering what I'm going to need to take off. It looks like nothing besides maybe the pipes? (T-5's) Is this right or will taking something else off make it easier to get to the motor? Quote
bri98 Posted January 7, 2004 Report Posted January 7, 2004 you have to remove the coolant lines, remove the one that goes to the water pump first that will drain most of the coolant. I also remove the carbs and intakes when I remove cylinders. If you remove the intakes plug the openings with rags just so nothing can fall into the bottom end. Also after you pull the jugs cover the open crankcase to keep out dirt an so no small parts can acidently fall in. Quote
909 Posted January 20, 2004 Report Posted January 20, 2004 Remove the tank. Best 6 bolts you can take off. It'll save your back too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.