4mm Stroker Dudes

[rebelbanshee2]

when my engine and tranny finaly make it out of ziploc bags and boxes and runs its going to be a 12 port 4mm LR stroker. Im wonder what gearing will suit this enine for the woods. on my ported 350 i had a 15t front and stock 41 rear w/ 20in tires and it work perfect. will i need to gear even taller for the stroker so it wont rev out too fast? or is the classic 15t still good? thanks!

[Blue Duece]

when my engine and tranny finaly make it out of ziploc bags and boxes and runs its going to be a 12 port 4mm LR stroker.  Im wonder what gearing will suit this enine for the woods.  on my ported 350 i had a 15t front and stock 41 rear w/ 20in tires and it work perfect.  will i need to gear even taller for the stroker so it wont rev out too fast? or is the classic 15t still good? thanks!

i run a 17 with my passion motor the 15 spun like a son of a bitch kinda like puting a 12 on a stock bike........id try a 16 or 17 my 17 pulls like a son of a bitch and still lifts my front end real nice.i can come off a idle with my 17 and accelerate like mad and still hook.......

[H300F]

I am running 15 41. It works but I think a higher gearing would be better. I am going see if i can get a 38 or 39 rear. Now i can start from a stop in 3rd rev and pop the clutch and spin all the way through it.