porting

[kennyraw]

hi guy quick question on my banshee jugs . 

i have a 1 piece jug serval kit my ring broke today . 

looking down into the jug cylinder  with the piston in as it  is in the banshee i see the big exhaust port  i see two very small port s to the side of the exhaust port wich have a divider well the divider piece chipped off a tad  nothing bad but enough to notice  

 

will this really hurt anything after i clean it up ?  

shoukd i just dermal the other cylinder out to match. or not even worry about it ? 

 

i am not sure why those two dime die ports do 

[gusto]

Bring it to shop. It might be enough to snag a ring. Also, you might need plating repair. 
This is something that can easily be fixed but by a professional 

[kennyraw]

what’s that port for ? 

i could just clean it up with a dermal  

[locogato11283]

Triple exhaust port.

[kennyraw]

here is. a pic the upper port goes to the intake  the lower one goes down to the crankcase as you can see the littil middil divider broke off.      so can i hone it out do. littil cleaning  and be good to go ?? 

i dont know how important the divider is 

[kennyraw]

to the left of picture is the exhaust port so you guys have a ide 

[gusto]

Thats going to require a professional to look at it and probably plating. Im no expert though, if it were mine id reach out to Millenium plating and ask them

[kennyraw]

i will do the that 

just wondering what tht port is