banshees and beers Posted December 18, 2003 Report Posted December 18, 2003 has anybody had any work done by this guy? just wondering http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2448849659 thanks Quote
erbilabuc Posted December 18, 2003 Report Posted December 18, 2003 from the looks of it his stage 3 looks more like a stage 1 or maybe two! Quote
SICK BOY Posted December 18, 2003 Report Posted December 18, 2003 He looks to have good feedback. Quote
Screamin_Banshee Posted December 18, 2003 Report Posted December 18, 2003 Remember porting is like most anything else, you get what u pay for!! If it was me, I would save a little more then send my cyl's to a reputable builder, that does the port work for YOUR type of riding. Call Jim at Passion Racing Engines 918-232-3950, his prices are comparable, and the work is top notch! Quote
Justintoxicated Posted December 18, 2003 Report Posted December 18, 2003 Remember porting is like most anything else, you get what u pay for!! If it was me, I would save a little more then send my cyl's to a reputable builder, that does the port work for YOUR type of riding. Call Jim at Passion Racing Engines 918-232-3950, his prices are comparable, and the work is top notch! I second that exactly. He does not have very good pics of the intakes. And I don't beleive in Stages of porting, which to me indicates the amount of shavings they take off, instead of where they take them off from. Save up a little more and send them to Jim. The work dosetn look bad, its just that you can only port them once, so you want it done to your riding style the first time. Also, if you talk to Jim and want pics I can show you mine Quote
banshees and beers Posted December 18, 2003 Author Report Posted December 18, 2003 Good input fellas, thanks for that. I was also looking at that racelogic self porting kit, kinda shying away from that now. I have all winter to get it done, so money is not really an issue. Quote
FORMULASPEED Posted December 21, 2003 Report Posted December 21, 2003 I have my cylinders done by this guy and Im happy with them. Big difference in power. ive had it almost a year. I just got some cylinders with trinity stage3 port work and they dont look as good a his port work. Not just my opinion either. He offers different kinds now. then he just offered 1 kind and it was cheeper. I wouldnt do it again cause of the fact I know more now then I did then. And his prices are higher so you might as well get it from a reputable porter. shawn Quote
69machrk Posted December 23, 2003 Report Posted December 23, 2003 i've had mine done by this guy and i must say he does do a great job. i had mine done when the cost was only 149.00. it gave me more low end and midrange than anything else. but i havent got to reallystretch the shees legs yet.... Quote
BitchenBanshee Posted December 26, 2003 Report Posted December 26, 2003 I do port and polishing work at a very cheap price. I don't go by stages (not a exact science between builders). I go by the us measurement scale. 1lb trail port 2lb mx port and a whopping 5 lb drag port. a 2lb port is where I carefully use a bench grinder and massage 2 lbs of shavings off of your cylinders. I will continue to massage filings from them until I have a scale which reads 2 pounds. I guarantee good results and for only 75.00 per cylinder. I will even send you the 2 pounds of shavings so you can show your friends!!! Quote
cb67rs1 Posted December 27, 2003 Report Posted December 27, 2003 I do port and polishing work at a very cheap price. I don't go by stages (not a exact science between builders). I go by the us measurement scale. 1lb trail port 2lb mx port and a whopping 5 lb drag port. a 2lb port is where I carefully use a bench grinder and massage 2 lbs of shavings off of your cylinders. I will continue to massage filings from them until I have a scale which reads 2 pounds. I guarantee good results and for only 75.00 per cylinder. I will even send you the 2 pounds of shavings so you can show your friends!!! im having to call BS on this Quote
NYUK Posted December 27, 2003 Report Posted December 27, 2003 I do port and polishing work at a very cheap price. I don't go by stages (not a exact science between builders). I go by the us measurement scale. 1lb trail port 2lb mx port and a whopping 5 lb drag port. a 2lb port is where I carefully use a bench grinder and massage 2 lbs of shavings off of your cylinders. I will continue to massage filings from them until I have a scale which reads 2 pounds. I guarantee good results and for only 75.00 per cylinder. I will even send you the 2 pounds of shavings so you can show your friends!!! i having to call BS on this WITH A BENCH GRINDER? I WOULDN`T LET THIS DUDE GENTLY MASSAGE MY COCK!LET ALONE SEND HIM A SET OF JUGS. Quote
BitchenBanshee Posted December 27, 2003 Report Posted December 27, 2003 Can't you guys see a joke when you read one!!! Man, I'm just kidding!!!!!!!!!!! You mean you don't want a 5 pound shave on your cylinders with a bench grinder! HAHAHAHAHAHAHAHA Quote
Blue Duece Posted December 27, 2003 Report Posted December 27, 2003 so money is not really an issue. id go with some one good then, if you sent me your stock jugs i could grind out something so youd feel a difference, but knowing how to port is completely different...... Quote
TEXWS6 Posted December 29, 2003 Report Posted December 29, 2003 there is a local guy that does some bad ass work on car heads, would it be good to take him the ones off my banshee?? Quote
Blue Duece Posted December 29, 2003 Report Posted December 29, 2003 there is a local guy that does some bad ass work on car heads, would it be good to take him the ones off my banshee?? sure, home depot does porting you could take them there two...... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.