Matt00695 Posted August 5, 2021 Report Posted August 5, 2021 Hey guys so I have a question regarding float measurements. Do you have to measure the float when the carb is tilted right before it touches the needle. Or do you measure the float with the carb upside down? Quote
sleeper06 Posted December 10, 2021 Report Posted December 10, 2021 Depending on carbs, stock is upside down and keihin is tilted when plunger touches Quote
kawa110 Posted December 10, 2021 Report Posted December 10, 2021 Golden knowledge Sent from my iPhone using Tapatalk Quote
ClaudeMachining Posted December 10, 2021 Report Posted December 10, 2021 You dont need to measure anything of you understand how it work.Put it straight, fill it, remove the bowl and check the level of the fuel in the bowl.It should fill it at 75-80%, if not adjust the tab and redo the test.Envoyé de mon SM-N975W en utilisant Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.