Jump to content

Recommended Posts

Posted

im in need of some help.heres my problem,my banshee starts cold fine, idles out fine runs like a champ.But when i baby the clutch out sometimes and stall it and if i let idle for a few seconds and shut it down the spark plugs foul with fuel. my thaugts are the the pilot screws are out of whack.i just cut the top of my air box today with plans on trying it out but of course i fould the plugs when i shut her down.Any in put would be great,my foot will thank you.

Posted
do you think if i take the air box lid off it may clear up?I just bought the bike and trying to de_bug it?

it might, but that will definately make it run leaner at WOT...

 

Your going to have to play with your jets if you do that anyways.

 

Sounds like your pilot jets are too big. I'd remove the lid but you have to have some type of clamp on filter if you do this. You will probably have to then re-adjust your main jet a few sizes also.

 

Have you tried playing with the idle screws?

Posted

it has the proflow air filter kit on it,and the guy i bought it from said that he had it jetted for the the pipes and other mods that are on it.This may seem a little dumb on my part but i havent even changed the gas that was in it and its been sitting since the summer and now its around 35degrees out.so maybe i should really start with the very basics>

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...