Need help, won't start

[blue]

Looking for any help or suggestions to get my Banshee back running. Bike sat up about 10 years in shed. Decided to get it back running.

Things I did to get it ready to go

• Cleaned out carburetors 
• Bought new fuel 
• New spark plugs

I can't get it to start or even act like it wants to. I am getting spark on both plugs, have been through carbs a couple times to double check. Reeds look good, compression is 180 psi in both cylinders and I have C12 race fuel. I am getting fuel to cylinders, but questioning whether I am getting too much and it is flooding and wont start. I am starting to run of out things to check. Checked flywheel and pickup, everything was good. What to do next?

[375hp banshees]

Exhaust plugged (rats nest)

Cross over tube back on

Slides in correct carb?

 

[blue]

Pulled exhaust and all good, cross over tube installed and slides are in correct carb. 

[375hp banshees]

Fuel ,air & spark  gotta figure out what's missing. Unless it's outa time & go from there. You thought it was flooded but did you try squirting fuel to it, that'll eliminate no fuel. was there fuel in pipes when pulled?