Stupify85 Posted March 13, 2020 Report Posted March 13, 2020 I have always run Klotz R50. My banshee lives at WOT. Had the engine apart when it finally quit on me in 2018... I bought it brand new in 2005. Looked clean and the cylinders were only .007 over spec in the bottom of the sleeve. Went .010 over and back together with a stock crank with upgraded bearing on the clutch side. It still runs as good as ever. I'm sold on Klotz, but most of it's life has been spent on the drag strip at high RPM. Quote
ClaudeMachining Posted March 13, 2020 Report Posted March 13, 2020 Any modern oil at anything from 2% to 4% of oil will do the job.Jett accordingly.Envoyé de mon SM-G965W en utilisant Tapatalk Quote
DuneRat Posted March 13, 2020 Report Posted March 13, 2020 yama lube but thinking about switching to klotz Quote
Stupify85 Posted March 13, 2020 Author Report Posted March 13, 2020 It smells pretty too... so that's a plus Quote
ginger Posted March 13, 2020 Report Posted March 13, 2020 i like Klotz supertechniplate, Maxima 927, my favorite is Powermist but it is hard to come by. Quote
ClaudeMachining Posted March 13, 2020 Report Posted March 13, 2020 I'm using Castor927 in the summer and K2 the rest of the time.Always at 2%Envoyé de mon SM-G965W en utilisant Tapatalk Quote
BumbleShee350 Posted March 14, 2020 Report Posted March 14, 2020 I use Blendzall Green Label mixed @ 32:1 with either VP110 or Sunoco Supreme 112. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.