Respect Posted July 1, 2019 Report Posted July 1, 2019 So I was "told" the right front hub was worn out. I pulled both, which needed bearings. The studs are good too. No unusual wear inside, bearings were tightly seated. One rotor wouldn't seat 100% so upon further investigation I noticed hubs were not the same. I need a gameplan?!? Quote
97Screamer Posted July 1, 2019 Report Posted July 1, 2019 I've got a set of stock hubs off my bike I'd sell for $25 shipped if you're interested. They are spray painted red but have good bearings, I pulled them off for billet hubs. Quote
Respect Posted July 2, 2019 Author Report Posted July 2, 2019 Already have bearings but that would solve my problem Quote
hoppedupandcutdown Posted July 2, 2019 Report Posted July 2, 2019 J-arm hubs, rotors, and rotor mounting bolts are different from A-arm parts Quote
Respect Posted July 2, 2019 Author Report Posted July 2, 2019 Yep that's it that's the difference thank you Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.