BOOST2311 Posted February 25, 2019 Report Share Posted February 25, 2019 Any way to tell if the frame is straight? Or is there anyone in Southern California that can measure it? Quote Link to comment Share on other sites More sharing options...
BOOST2311 Posted February 25, 2019 Author Report Share Posted February 25, 2019 https://photos.app.goo.gl/VnhHSEoQu9Bisz3k8 Quote Link to comment Share on other sites More sharing options...
SKEETER Posted February 25, 2019 Report Share Posted February 25, 2019 Have you tried running a string line from a-arm mounts back to axle ? Pretty straight forward, pick the same spots on both sides and see what ya come up with. Easier when a-arms are on. 1 Quote Link to comment Share on other sites More sharing options...
BOOST2311 Posted February 25, 2019 Author Report Share Posted February 25, 2019 Have you tried running a string line from a-arm mounts back to axle ? Pretty straight forward, pick the same spots on both sides and see what ya come up with. Easier when a-arms are on.The rear axle is still in so I'll try doing some measurements. Thanks for the pointer. I think its straight but not 100 percent sure. It's been raced and it's a 87 with some hard ridingSent from my SM-G950U using Tapatalk Quote Link to comment Share on other sites More sharing options...
BOOST2311 Posted February 25, 2019 Author Report Share Posted February 25, 2019 Just did some Measuring and it seems dead on. I'll do some more precise measurements tomorrow. Sent from my SM-G950U using Tapatalk Quote Link to comment Share on other sites More sharing options...
SKEETER Posted February 25, 2019 Report Share Posted February 25, 2019 Subframe looks tweaked in couple Pics , might just be pic angle. But I'd find reference points on that and measure forward, and down , just to check. Quote Link to comment Share on other sites More sharing options...
specialblend07 Posted February 25, 2019 Report Share Posted February 25, 2019 Frames are cheap. If you're worried, find a new one. Quote Link to comment Share on other sites More sharing options...
ride.race.live Posted February 25, 2019 Report Share Posted February 25, 2019 used frames are cheap but again the odds of it being straight are pretty damn slim too.... Banshee frames are made of swiss cheese.. ya fuckin fart on it and the subframe tweaks out.... go ass NYUK why he had custom holes made in his seat when he was a banshee boy.... little piece of advice.... if it rides straight F it and ride it.... The subframe can be re straightened too with little effort... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.