martin059 Posted January 20, 2019 Report Posted January 20, 2019 Just put on 35s carbsWaiting on powered for the frame to be done will post when the twin spitter is complete Sent from my iPhone using Tapatalk Quote
Canadianshee Posted January 21, 2019 Report Posted January 21, 2019 Just put on 35s carbsWaiting on powered for the frame to be done will post when the twin spitter is complete Sent from my iPhone using TapatalkKitchen table classic. Look forward to progress picSent from my LG-H873 using Tapatalk 1 Quote
SandSlingerOR Posted January 21, 2019 Report Posted January 21, 2019 (edited) Very cool! 7mill would be fun. Edited January 21, 2019 by SandSlingerOR 1 Quote
pp13bnos Posted January 21, 2019 Report Posted January 21, 2019 My old redline 7mill stock cylinder was a nice all around motor. For just general duning, that would be my motor of choice. 1 Quote
martin059 Posted January 26, 2019 Author Report Posted January 26, 2019 https://uploads.tapatalk-cdn.com/20190126/.jpg Just got the frame back from powder shitty pic tho. Waiting on new front end + rear and front elka shocks Sent from my iPhone using Tapatalk Quote
martin059 Posted January 26, 2019 Author Report Posted January 26, 2019 Sent from my iPhone using Tapatalk Quote
locogato11283 Posted January 26, 2019 Report Posted January 26, 2019 You decided not to cut off any of the stock tabs you don't need? Quote
martin059 Posted January 26, 2019 Author Report Posted January 26, 2019 You decided not to cut off any of the stock tabs you don't need?First one I ever built from bottom up I didn’t even think about that. Wish I would tho, so much to learn tips and tricks what’s junk and what’s good I’m glAd for banshee hq to learnSent from my iPhone using Tapatalk Quote
locogato11283 Posted January 26, 2019 Report Posted January 26, 2019 Let me give you a little advice, since you just joined the FB page.. You will learn much more here than you ever will there. These are the OGs. The guys you see on the FB group are a bunch of spoon fed dummies. Quote
martin059 Posted January 26, 2019 Author Report Posted January 26, 2019 Let me give you a little advice, since you just joined the FB page.. You will learn much more here than you ever will there. These are the OGs. The guys you see on the FB group are a bunch of spoon fed dummies.Hell yea man. Sent from my iPhone using Tapatalk Quote
salmon_slayer06 Posted February 4, 2019 Report Posted February 4, 2019 The drag banshees they build on here are the real deal. Not just a bunch of chrome bolt ons. 1 Quote
Big Mike NY Posted February 5, 2019 Report Posted February 5, 2019 On 1/26/2019 at 11:55 AM, locogato11283 said: Let me give you a little advice, since you just joined the FB page.. You will learn much more here than you ever will there. These are the OGs. The guys you see on the FB group are a bunch of spoon fed dummies. Millennials? 🙂 Quote
Ayesully810 Posted February 5, 2019 Report Posted February 5, 2019 On 1/26/2019 at 11:55 AM, locogato11283 said: Let me give you a little advice, since you just joined the FB page.. You will learn much more here than you ever will there. These are the OGs. The guys you see on the FB group are a bunch of spoon fed dummies. you should join the blasters only page, that bunch makes the people on the hq fb page look likea bunch of thomas edisons Quote
martin059 Posted February 5, 2019 Author Report Posted February 5, 2019 I’m sure you guys seen this stuff and better but here’s a couple things going on Swing arm I’m returning it for round carrier. Alba I know. Sent from my iPhone using Tapatalk Quote
ClaudeMachining Posted February 5, 2019 Report Posted February 5, 2019 Nice setup. A round carrier is the way to go. Envoyé de mon SM-G965W en utilisant Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.