Leadfoot350 Posted December 10, 2003 Report Posted December 10, 2003 I want to see if I have an air leak but have no idea how to do it. I am sorry for my ignorance on the leak down test. lol Quote
Screamin_Demon Posted December 10, 2003 Report Posted December 10, 2003 Try this thread: Homemade Leakdown tester. It took some digging, but it's a complete how to on making and using one. Quote
Leadfoot350 Posted December 10, 2003 Author Report Posted December 10, 2003 I have the 2-1 style carb set up so how would perform the test? Quote
Screamin_Demon Posted December 10, 2003 Report Posted December 10, 2003 Good question... you may want to give mcaf29 a pm and see if he'll get back to you on a suggestion. Quote
boonman Posted December 10, 2003 Report Posted December 10, 2003 Just put the vacuum cap in place of the carb, and plug the exhaust up. it should work the same.. Quote
jinx44 Posted December 10, 2003 Report Posted December 10, 2003 You must bloc off both intae and exhaust ports and test both cylinders at the same time. There isn't a seal between the two cylnders on the banshee. Ran into this problem before. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.