Throttle cable info

[ClaudeMachining]

There is only one kit made for all pwk?

There is different brand and quality?

 

 

Envoyé de mon SM-N910C en utilisant Tapatalk

 

 

[trickedcarbine]

Motion Pro  

[JUSTWANNARACE]

Any stock lenght cable will work so either OEM or motion pro. I don't much care for the Terry cables

[Ayesully810]

motion pro 01-0813 cable number

[ClaudeMachining]

Thx guys.

Envoyé de mon SM-G935W8 en utilisant Tapatalk

[sleeper06]

If you have problems getting full throttle I know cam was having custom cables made to open the bigger carbs, I grabbed a few a few months back. You can also call motion pro your self 

[ClaudeMachining]

If you have problems getting full throttle I know cam was having custom cables made to open the bigger carbs, I grabbed a few a few months back. You can also call motion pro your self 

I broke the one i had on my 35mm. So i took my old one that was on my stock carbs, but it's old and he's harder to pull.

So i want a brand new one.

Envoyé de mon SM-G935W8 en utilisant Tapatalk

[sleeper06]

Got ya, I know something happened at motion pro like they changed hands and the newer cables weren't opening up the pwk all the way no matter what you do, so custom ones were made 

[camatv]

the center splitter is to short  there just isnt enough throw in that section..  the TORRS cable has a longer center section  i have made a few in the past to open 35/36mm all the way by combining the 2 cables.