mxturd Posted March 9, 2017 Report Posted March 9, 2017 Anyone have any experience with these? I can't get the throttle to open all the way with it installed. Do I need a nut on the threaded part of the cable that goes on the carb cap? Any suggestions would be appreciated Quote
RagunCajun Posted March 9, 2017 Report Posted March 9, 2017 If it has a jam nut on the top, you can losen that and adjust the cable. Motion pro cables are like that. Not sure about Terry cable. Quote
mxturd Posted March 9, 2017 Author Report Posted March 9, 2017 On the very top at the thumb throttle Quote
banshee#527 Posted March 9, 2017 Report Posted March 9, 2017 There should be an adjustment jam nut at the throttle housing as well Quote
WALZ Posted November 29, 2020 Report Posted November 29, 2020 A little late but clearing this for the next guy as it drove me crazy till I figured it out. There is a sneaky adjustment in the middle where the cable goes from 1 in 2 cables. Spin top and bottom to get more throw. Separately you use different length barrel adjuster on carb . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.