Aftermarket seingarm bearing size

[mxturd]

I'm going to change out my axle bearings and have a fireball -2 swingarm and axcaliber axle. I'm wondering what size bearings/seals do I use. It's a roundhouse bearing carrier. Thanks

[sheerider11]

I'm going to change out my axle bearings and have a fireball -2 swingarm and axcaliber axle. I'm wondering what size bearings/seals do I use. It's a roundhouse bearing carrier. Thanks

Oem

What carrier? My JJA has 4

[mxturd]

It's a roundhouse carrier, bought it from Jansen racing years ago, but I'm pretty sure it's the same as a fireball swingarm

[mxturd]

So probably one bearings and seals?

[ginger]

as far as i know, they bearings OD are all pretty much the same, its the ID that changes depending on the diameter of the axle. 

 

I have 4 bearings in mine as well. 

[sheerider11]

So probably one bearings and seals?

Just pull the axle. You'll See if it's a single or twin row.

[trickedcarbine]

With the axcaliber axle, you'll need 35mm bearings. Pull the axle to see if you have single tapered or dual row.

[mxturd]

Was just tying to order the bearings in advance to reduce down time