Lampy0902 Posted January 8, 2016 Report Posted January 8, 2016 Sent from my iPhone using Tapatalk Quote
Lampy0902 Posted January 8, 2016 Author Report Posted January 8, 2016 I just bought the Athena kit I have the trinity 2into1 35mm carb setup do you think that will work I have no bottom end power im also running dmc pipes and vforce 3 reeds Sent from my iPhone using Tapatalk 1 Quote
trickedcarbine Posted January 8, 2016 Report Posted January 8, 2016 That thing should be snappy, but it would still be snappy and be much happier with 2 smaller carbs instead of the single 35. Quote
Andreb84 Posted January 11, 2016 Report Posted January 11, 2016 I just bought the Athena kit I have the trinity 2into1 35mm carb setup do you think that will work I have no bottom end power im also running dmc pipes and vforce 3 reeds Are you running a stock crank??did you port the cylinders?? Sent from my iPhone using Tapatalk Quote
pablopab50 Posted January 12, 2016 Report Posted January 12, 2016 No need big carbs unless you have a cheetah cub or serval 421 or bigger. As suggested, a pair of 28 PWKs would be perfect. Single carb is meant for single cylinder! Quote
bigweav81 Posted January 13, 2016 Report Posted January 13, 2016 Ya single carbs suck on banshees... Zilla did you ever have your old set up dynoed with two carbs? sent from yo mammy house. Quote
Bennett131 Posted January 13, 2016 Report Posted January 13, 2016 Zilla did you ever have your old set up dynoed with two carbs? sent from yo mammy house. Hell, that's with 1 pipe too. Quote
bigweav81 Posted January 13, 2016 Report Posted January 13, 2016 Hell, that's with 1 pipe too.You maybe right. I thought it was fmf pipes. sent from yo mammy house. Quote
Bennett131 Posted January 13, 2016 Report Posted January 13, 2016 that was with fmfs, never had a chance to dyno my setup with the single pipe.Do you think it made more? Quote
sleeper06 Posted January 13, 2016 Report Posted January 13, 2016 I've built some extremely well running and well rounded 2-1 banshees. Nobody like the trinity set up but I made it work fine. Engines were also ported for torque Quote
freshsbanshee Posted January 13, 2016 Report Posted January 13, 2016 How much would you sell a old athena cylinders and head for just wondering if have a set just laying around Sent from my SAMSUNG-SM-G920A using Tapatalk Quote
sleeper06 Posted January 13, 2016 Report Posted January 13, 2016 250-300 cuz they prob need nik Quote
trickedcarbine Posted January 13, 2016 Report Posted January 13, 2016 nope. it had a more 4 stroke pull, but it didn't really rev out that great. Here is a curve of the shearer pipe on a pump gas, stock carb, ported engine. the red line is the stock stroke, the blue is a 7mil crank, same port time, stock carbs, and similar compression. 66hp 7 mil? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.