Jump to content

Recommended Posts

Posted

So today I road my banshee in awesome Derry nh. There was abt 3 inches of snow. Was shifting fine all day till the end of the day I was doing a hard pull from 1-3 and noticed wen I have the Tirea spinning fast or I wasn't hitting the shifter good enough but during the day it was good all day on hard acceleration. Maybe it was from the accessive spinning In snow

Posted

I dont understand what your asking?

 

Sent from my VS810PP using Tapatalk

I felt is though when I'm on the gas hard from a dead stop on snow I feel like I keep hitting neutral is there something wrong with the tranny or is it just bec the tires are spinning so freely on the snow. It fine when Im driving through the trails normal

Posted

Get it out of the snow and up on a stand rear tires off the ground. Shift through the gears to eliminate the "spinning in the snow factor". See if your gears shift properly... Also while in gear, hold the clutch in crack the throttle see if the rear tires move with the clutch in- check for clutch cable adjustment.

Posted

Ok I will try that should I get on the throttle while I'm doing so and it was shifting fine before I was doing 1-3 pulls at (WOT) is on the dirt no issues at all it's prob just me to be honest it's hard to hold on need to set it up better and get a nice aftermarket shift that's more comfortable

Posted

Pull the cover and check that the eccentric shift dowl is adjusted properly. Make sure that the detent arm and spring are to weebly wobbly. Check that the shift shaft isn't all slopped out.

 

If you're unsure of what all that is, it's time to order a manual.

  • Like 1
Posted

Shift shaft is brand new the spring that goes on shift shaft was a little worm I'll get a new one will the modded shift star and roller arm from cascade will that help it shift better it's all adjusted correctly had it apart wen I did the bottom end

Posted

Shift shaft is brand new the spring that goes on shift shaft was a little worm I'll get a new one will the modded shift star and roller arm from cascade will that help it shift better it's all adjusted correctly had it apart wen I did the bottom end

Should have just went ahead and done the pro mod trans while you were in there.
Posted

Should have just went ahead and done the pro mod trans while you were in there.

Fuck I've got promod, mull detent bearing, modded star, modded shaft and I still can't get in neutral

 

 

Sent from my iPhone using Tapatalk

Posted

Fuck I've got promod, mull detent bearing, modded star, modded shaft and I still can't get in neutral

 

 

Sent from my iPhone using Tapatalk

Really? I can shift from first to sixth gear without even moving, and can hit nuetral with ease. I have a bearing on the stator side of the shift drum, modded star, and every other dog cut off the gears. I'm running a stock shift shaft, stock spring and a stock detent arm. Fugger shifts like butter.
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...