Oilsmoke Posted December 1, 2003 Report Posted December 1, 2003 Jim What type piston you use? Preferred Carb for duning. And would a 1/2 be good or bad idea? Quote
PassionRE Posted December 1, 2003 Report Posted December 1, 2003 1/2?........ 795 series Wiseco's pistons on the long rods...Jim Quote
PassionRE Posted December 1, 2003 Report Posted December 1, 2003 Oh Yeah, duning on the long rod..PJ34 Keihin's all the way with 4 inch runners on the breathers into a single K&N...Jim Quote
PassionRE Posted December 1, 2003 Report Posted December 1, 2003 Oilsmoke, did you see the pics of that 34mm intake I posted?...thats the piece that went on Blue Dueces monster motor...Jim Quote
Oilsmoke Posted December 1, 2003 Author Report Posted December 1, 2003 oppps 1/2 intake Spacer Not sure if i seen it. Give me a url and I will check it out. Quote
Oilsmoke Posted December 1, 2003 Author Report Posted December 1, 2003 Oh one more what was the name of that Crank shop and Url if they have one? Quote
PassionRE Posted December 1, 2003 Report Posted December 1, 2003 http://zepher.bikepics.com/pics/yamaha-rd4...pics-084960.jpg http://zepher.bikepics.com/pics/yamaha-rd4...pics-084963.jpg Are you talking 1/2 inch reed spacers? On tha Boss racing manifold I wouldn't recomend it it puts the reeds too far from the throttle slide IMO...Jim Quote
Blue Duece Posted December 1, 2003 Report Posted December 1, 2003 Oilsmoke, did you see the pics of that 34mm intake I posted?.. this new website is neat, nice and quick and such, but can a brotha just post a frickin pic on this thing sheeesh............. Quote
PassionRE Posted December 1, 2003 Report Posted December 1, 2003 I cant get those links to work but I posted them on that post you put on about the equalizer tubes Oilsmoke...ck em out...Jim Quote
Blue Duece Posted December 1, 2003 Report Posted December 1, 2003 those links are dead jim...........arrrr im going to start a website just so i can post pics and drop links in my post's........... this sucks...... Quote
PassionRE Posted December 1, 2003 Report Posted December 1, 2003 Oilsmoke, I use Wiseco hot rods+4 long rod cranks only...affordable and put together real nice...Jim Quote
PassionRE Posted December 1, 2003 Report Posted December 1, 2003 Blue Duece, Im not sure why those dont work...go to Engine section and look for the Oilsmoke post under balance tubes..those links work...Jim Quote
Oilsmoke Posted December 1, 2003 Author Report Posted December 1, 2003 Yes 1/2 reed spacer Yes I seen the intakes I ebay a set from tara79 My new intakes I should ask before I buy Quote
PassionRE Posted December 1, 2003 Report Posted December 1, 2003 If your carbs will clear the block, dont run the spacers...Ive seen those...great deal....Jim Quote
Oilsmoke Posted December 1, 2003 Author Report Posted December 1, 2003 Well I sell them spacers. Yes my carbs clear with the new intakes, and they look alot better in your hand than in the pic. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.