autolover3 Posted November 11, 2015 Author Report Posted November 11, 2015 Are you running stock styled 3 hose or went to 2 line from handlebars? Sent from my iPhone using Tapatalk Quote
mike0chek Posted November 11, 2015 Report Posted November 11, 2015 Are you running stock styled 3 hose or went to 2 line from handlebars? Sent from my iPhone using Tapatalk i have 2 lines running to raptor 700 calipers Quote
autolover3 Posted November 11, 2015 Author Report Posted November 11, 2015 Well gettin things cut and smoothed out. Gonna call er quits tonight. Handle nerf mounts tomorrow night. Mounts a bit crooked but just mockin up Sent from my iPhone using Tapatalk Quote
bluebanshee98 Posted November 11, 2015 Report Posted November 11, 2015 The xfr nerfs are not a bad setup but you will have to kick with your heel FYI. If you have a pump gas motor then shouldn't really be a problem Quote
autolover3 Posted November 11, 2015 Author Report Posted November 11, 2015 i have 2 lines running to raptor 700 calipers Mine being an j arm bike would i be able to run raptor calipers? Or is that for a arm front ends? But you like your streamlines then? Have a pic of them by chance? The xfr nerfs are not a bad setup but you will have to kick with your heel FYI. If you have a pump gas motor then shouldn't really be a problem Yeah, ive seen some posts of people mentioning that. Im not planning anything ridiculous for engine And i dont think kickin off my heel will bother me too much. Sent from my iPhone using Tapatalk Quote
m671054 Posted November 11, 2015 Report Posted November 11, 2015 I think it depends on whar spindle you have now. Post pic of spindle and caliper you have now. Quote
SandSlingerOR Posted November 12, 2015 Report Posted November 12, 2015 I really like them nerfs but them dang things are over $300. I like your build so far man. Quote
mike0chek Posted November 12, 2015 Report Posted November 12, 2015 Mine being an j arm bike would i be able to run raptor calipers? Or is that for a arm front ends? But you like your streamlines then? Have a pic of them by chance? Sent from my iPhone using Tapatalk im not up to date with a j arm setup but if the knuckles are the same as a stock a arm setup they should bolt right up.(yfz calipers also) and i really like the streamline lines so far, no pics at the moment sorry Quote
autolover3 Posted November 13, 2015 Author Report Posted November 13, 2015 I think it depends on whar spindle you have now. Post pic of spindle and caliper you have now. Ill take a look and get some pics soon. Just been really busy at work this week. I really like them nerfs but them dang things are over $300. I like your build so far man. Got mine off amazon for $300. Little spendy but they seem like some pretty solid sexy lookin pieces IMO. im not up to date with a j arm setup but if the knuckles are the same as a stock a arm setup they should bolt right up.(yfz calipers also) and i really like the streamline lines so far, no pics at the moment sorry Its all good bud. Tomorrow or this weekend I should be able to get my frame fixed for the nerf mounts. Will be posting pics of progress! Sent from my iPhone using Tapatalk Quote
autolover3 Posted November 13, 2015 Author Report Posted November 13, 2015 Alright. I may be goin crazy here. Got nerfs mocked up somewhat decently this evening. Once i get frame fixed this weekend ill be able to really line things up. But heres my question. Where do those rear mounts go? These do look badass though. Sent from my iPhone using Tapatalk Quote
Gunner18 Posted November 13, 2015 Report Posted November 13, 2015 What are you gonna do about those tabs on the heel gaurds Quote
autolover3 Posted November 13, 2015 Author Report Posted November 13, 2015 Thats what im wondering haha. Is there suppose to be a bracket from original heel guards or am i missin something. Ill dig through my part boxs to make sure I didn't forget something unless i have to make brackets for them? Sent from my iPhone using Tapatalk Quote
sheerider11 Posted November 13, 2015 Report Posted November 13, 2015 Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
autolover3 Posted November 14, 2015 Author Report Posted November 14, 2015 Interesting.... So im missing brackets than. Sent from my iPhone using Tapatalk Quote
bluebanshee98 Posted November 14, 2015 Report Posted November 14, 2015 Your missing tabs but it should be ok. You need to run a long bolt for the engine motor mount. It will go through the frame and stick out. The tab for the nerf bar will slide over it and your put a nut. Secure Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.