pappawtherodder Posted October 31, 2015 Report Posted October 31, 2015 Getting ready to install an in-line temp gauge on the shee. What is a safe operating temp range. I live in north Texas so this info could be critical next summer. Quote
sycoticbanshee00 Posted November 12, 2015 Report Posted November 12, 2015 175-180 degrees, anything over 200 I would shut it down. Quote
ClaudeMachining Posted November 12, 2015 Report Posted November 12, 2015 I set my digatron to 200. I think it's pretty much what all people do and it's pretty safe. Quote
Juststrokeit Posted November 12, 2015 Report Posted November 12, 2015 Not to thread jack.. But we were down in LSOK and it was night time (couldn't see the gauge) but we got back to camp and my max on my tto hit 245.. It runs fine.. But I'm gonna open it up in a few weeks to see what that was about.. Sent from my iPhone using Tapatalk Quote
#1JUANstunna Posted November 12, 2015 Report Posted November 12, 2015 hmmm.... maybe different but... 220 is usually boiling point of coolant, I know most 450's operate in the 180-200 range.. I think the fan jumps on at 195-200ish... IMO... if you cant start getting the bike cooler passed 200 shut it down... but its MUCH better to cool the bike riding it then shutting down at 200.... just my opinion... Coolant doesn't boil at 220* when its under pressure. 50/50 mix is more in the 250* range @ 8psi. Sent by me FFS from Tapacrap Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.