gregckrt1 Posted September 1, 2015 Report Posted September 1, 2015 I rebuilt my banshee put everything back together correctly and both cylinders have compression but it want fire on right side left side blowing hot hot exhaust and right cold n no smoke I cleaned the carbs and the fly wheel. What could be some other possibilities it could be Sent from my iPhone using Tapatalk Quote
wayne_smith97 Posted September 1, 2015 Report Posted September 1, 2015 Have you switched the plug wires to see if the problem follows? Quote
gregckrt1 Posted September 1, 2015 Author Report Posted September 1, 2015 (edited) Yeah and it still happens to the right one Sent from my iPhone using Tapatalk Edited September 1, 2015 by gregckrt1 Quote
gregckrt1 Posted September 1, 2015 Author Report Posted September 1, 2015 Switched the plugs to. I thought a wire was grounding off of something bc there was a few open wires but nope it started to get alittle smoke and then went away Sent from my iPhone using Tapatalk Quote
wayne_smith97 Posted September 1, 2015 Report Posted September 1, 2015 Does the right cylinder pick up if you rev it up? Quote
lil Doobie420 Posted September 1, 2015 Report Posted September 1, 2015 try switching the carbs if u can. its prolly in the sync or maby the reeds. Quote
gregckrt1 Posted September 1, 2015 Author Report Posted September 1, 2015 I have stock mikuni carbs chokes only on one side Sent from my iPhone using Tapatalk Quote
hoppedupandcutdown Posted September 1, 2015 Report Posted September 1, 2015 I have stock mikuni carbs chokes only on one side Sent from my iPhone using Tapatalk Get a longer crossover hose then. Quote
wayne_smith97 Posted September 1, 2015 Report Posted September 1, 2015 You will only have one choke knob, but you should have a hose connecting the two carbs. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.