SoonerFanAZ Posted July 8, 2015 Report Posted July 8, 2015 Well started the banshee up and rode around the block to keep everything fresh and while putting her up I notice this. Bolt isnt loose just having fluid coming out. Head Gasket time or worst? How easy is it to change the gasket? Quote
dankengineering Posted July 8, 2015 Report Posted July 8, 2015 Almost looks like it is the fuel valve dripping fuel on the head stud. The seal on the fuel valve is probably hard an brittle. sent from somewhere Quote
SoonerFanAZ Posted July 9, 2015 Author Report Posted July 9, 2015 Almost looks like it is the fuel valve dripping fuel on the head stud. The seal on the fuel valve is probably hard an brittle. sent from somewhere The valve is all dry, nothing leaking from there. Fluid is coming from the one head stud only, i check and the torque is still good. Quote
SoonerFanAZ Posted July 9, 2015 Author Report Posted July 9, 2015 Head gasket Easy to change? Is there a link on this forum somewhere on how to do it? Quote
Power_Man Posted July 10, 2015 Report Posted July 10, 2015 drain coolant. remove plug boots remove plugs remove head nuts remove gasket cleaner surface new gasket repeat steps backwards. torque to 25lb 1 Quote
Bennett131 Posted July 10, 2015 Report Posted July 10, 2015 Tq it back evenly criss crossingThe stock head has the correct pattern numbered on it. 1 Quote
RagunCajun Posted July 10, 2015 Report Posted July 10, 2015 My mistake. Never owned a stock head. Ty for the info 1 Quote
trickedcarbine Posted July 10, 2015 Report Posted July 10, 2015 The stock head has the correct pattern numbered on it.The average stock Brain does not compute what all those numbers mean, so it just gets done however... Quote
Bennett131 Posted July 10, 2015 Report Posted July 10, 2015 The average stock Brain does not compute what all those numbers mean, so it just gets done however...And I'm sure it's sufficient Quote
salmon_slayer06 Posted July 11, 2015 Report Posted July 11, 2015 Keep the spark plugs in, loosen the stud nuts but leave on, kick motor over to help break the head gasket seal..... Quote
SoonerFanAZ Posted July 14, 2015 Author Report Posted July 14, 2015 drain coolant. remove plug boots remove plugs remove head nuts remove gasket cleaner surface new gasket repeat steps backwards. torque to 25lb Thank you Quote
SoonerFanAZ Posted July 14, 2015 Author Report Posted July 14, 2015 Keep the spark plugs in, loosen the stud nuts but leave on, kick motor over to help break the head gasket seal..... Are you being serious? I don't want to damage anything... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.