SHEEMAN0415 Posted June 10, 2015 Report Share Posted June 10, 2015 I currently have cages like this they got the two notches cut out on each side, the intake boots also have these notches to fill in on the cage. Could i put regular boots on these cages or would that cause problems? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
98_sheester Posted June 10, 2015 Report Share Posted June 10, 2015 Are those boysens cuz if so yes you can use stock Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted June 10, 2015 Report Share Posted June 10, 2015 Seeing as the banshee only has 4 bolts per cage, no fucking clue what your pic is of. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted June 11, 2015 Report Share Posted June 11, 2015 If you mean you have boyhesons that protrude like those in the photo, use the UPP manifolds. They should clear everything just fine( at least the ones I used a few years ago did) Quote Link to comment Share on other sites More sharing options...
SHEEMAN0415 Posted June 11, 2015 Author Report Share Posted June 11, 2015 Larry them ones aint banshee ones just an example. An yeah there boyesens just didnt know if a stock boot would work with that cage type or not Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.